5.2 Canceling Destination - Furuno GP-150 Installation Manual

Skipping route waypoints
You may skip route waypoints by displaying
"DI" (DIsable) next to the route waypoint in
the route list. Using Figure 5-14 as an
example, your ship is currently heading
toward waypoint 04 but is to switch course
and head to waypoint 03. In this case you
would want to skip waypoint 04.
Waypoint 01
Waypoint 02
Port A
New course
Waypoint 06
Port B
Figure 5-14
1) Press WPT RTE and 6 to display the
route list. Press the cursor keys to select
route.
"EN" indicates waypoint
is enabled. Display "DI"
to skip waypoint.
ROUTE :01
skip Distance
001
Trial Speed Auto Man (012.0kt)
01 0
01 0 04 EN
02 0 03 EN 345.67nm
004
34° 12.345' N
MARINE POINT APR 10' 95 12:35U
003 36° 12.345' N
A POINT
: RTE WPT
ENT:Enter
Figure 5-15 Route list
Waypoint 03
Waypoint 04
Waypoint 05
(In Use, REVERSE)
TTG
nm
D M H
2D 12H 34M
130° 23.456' E
135° 23.456' E
APR 10' 95 13:45U
CLEAR: Delete
MENU:Escape
5. STARTING FOR DESTINATION
2) Press or to select route waypoint
to skip.
3) Press or to shift the cursor to the
right of the waypoint number.
4) Press to change "EN"(ENable) to
"DI"(DIsable).
5) Press the NU/CU ENT key.
To reselect the waypoint, select it on the
route list and press
"EN".

5.2 Canceling Destination

1) Press the GOTO key.
2) Press 5 to select Cancel. The message
shown in Figure 5-16 appears.
Release GOTO ?
ENT:Yes MENU:No
Figure 5-16
3) Press the NU/CU ENT key.
to change "DI" to
5-5