Furuno GP-150 Installation Manual page 30

6. INITIAL SETTINGS
14) Output data from the computer. When loading data is completed, the cursor shifts to
Stop.
15) Press the MENU ESC key.
Setting DATA 4 to DGPS
An external DGPS receiver can be connected to the DATA 4 port.
Follow the procedure below to setup the GP-150 according to the specifications of the
DGPS receiver.
1) Press MENU ESC, 9 and 5.
2) Press or to select Level.
3) Press or to select level; RS232C or RS422.
4) Press the NU/CU ENT key.
5) Press or to select DGPS.
6) Press to select To Next Page.
7) Press or to select First Bit.
8) Press or select first bit; MSB or LSB.
9) Press to select Parity.
10) Press or to select parity bit; EVEN, ODD or NONE.
11) Press to select Stop Bit.
12) Press or to select stop bit; 1 or 2.
13) Press to select Baud Rate.
14) Press or to select baud rate; 4800 or 9600.
15) Press the NU/CU ENT key.
16) Press the MENU ESC key.
DATA 4 I/O SETUP <DGPS>
To previous Page
MSB
First Bit
EVEN
Parity
1
Stop Bit
4800
Baud Rate
: Select
ENT: Enter MENU: Escape
DATA 4 I/O SETUP <DGPS> menu
22
2/2
LSB
ODD NONE
2
9600