Setting Route As Destination; Setting User Waypoint As Destination; Canceling Destination - Furuno GP-32 Operator's Manual

Dgps navigator gps navigator
Hide thumbs Also See for GP-32:
Table of Contents

Advertisement

5. DESTINATION
5.3 Setting Route as
Destination
1. Press the [GOTO] key.
2. Choose "ROUTE?".
3. Press the [ENT] key.
SELECT GOTO ROUTE
NO
[NEW?]
LOG EMPTY ROUTE
®
01
017
021
®
02
OSAKA
KOBE
®
03
EIMI
KIMI
04
BOSTON
GOTO ROUTE list
4. Choose a route.
5. Press the [ENT] key. The following
options window appears.
FORWARD?
REVERSE?
Route following direction options
6. Choose "FORWARD?" or "REVERSE?",
the order in which to traverse the route
waypoints, and then press the [ENT] key.
Intermediate Point 2
[ROUTE 01]
(WPT 002)
Intermediate Point 1
(WPT 001)
FORWARD
KOBE
(Starting point)
Meaning of forward and reverse
Current position becomes the starting point. A
dashed line runs between the starting point
and all route waypoints. Next destination
waypoint is shown in reverse video.
The destination waypoint is automatically
switched when the boat enters the arrival
alarm range or the boat passes an imaginary
perpendicular line passing through the center
of the destination waypoint. For how to set
the arrival alarm, see paragraph 6.1.
28
OSAKA
(Arrival point)
REVERSE
Intermediate Point 1
(WPT 003)
5.4 Setting User Waypoint as
Destination
You may place a desired waypoint in the
GOTO options window and use it to set
destination.
Choosing user waypoint
1. Press the [GOTO] key.
2. Choose "SETUP?" and then press the
[ENT] key.
SELECT USER WPT
[NEW?]
001
003
004
006
007
CURSOR
KOBE
OSAKA
START
_ _ _ _ _ _
_ _ _ _ _ _
_ _ _ _ _ _
_ _ _ _ _ _
SELECT USER WPT list
3. Choose waypoint desired and then press
the [ENT] key. The GOTO window
appears, showing the waypoint selected
as below.
GOTO
WPT-LIST?
001
WPT-NEAR?
OFF??
ROUTE?
CURSOR?
SETUP?
GOTO options
4. Choose user waypoint and then press the
[ENT] key.
A dashed line connects own ship and the
waypoint selected, which is shown in reverse
video.

5.5 Canceling Destination

You can cancel destination as follows:
1. Press the [GOTO] key.
2. Choose "OFF?".
3. Press the [ENT] key.
002
005
008
MOB
_ _ _ _ _ _
_ _ _ _ _ _
_ _ _ _ _ _

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp-37

Table of Contents