Other Menu Items - Furuno FSV-85 Operator's Manual

3. VERTICAL MODE
3.11

Other Menu Items

This section describes menu items which have not been explained yet.
Gain Setting menu
Gain Control: If the amount of gain change affected with the GAIN control on the front
panel is too low, change the setting to [Wide], to double the range of the control.
Display Setting menu
Gain Offset: Adjusts gain level. If the GAIN control on the front panel does not provide
satisfactory gain adjustment, enter an offset here. The setting range is 0-12.
Signal Level: Contaminated water or reflections from plankton may be painted on the
screen in green or light-blue. These echoes may be erased in order of strength. The
setting range is 0-15; 0 corresponds to the weakest color.
Color: Select color arrangement to use. The default setting is Color 1.
3-16