Furuno FSV-85 Operator's Manual page 146

7. OTHERS MENU
Data Display menu
This menu turns on/off alphanumeric data. Select [Data Display] on the [Initial Setting]
menu then push the left-click button.
Range/Bearing: Turns on/off the range and bearing data which appears when the
range/bearing marks are turned on.
Fishing Area: Not used.
Cursor Position: Turns on/off the cursor position (latitude and longitude) display.
(Requires navigation data.)
Note: When [EXT Data] on [Setting]-[Lat/Lon] on system menu is set to [Disable], the
cursor position is not displayed even if the [Cursor Position] on [Initial Setting]-[Data
Display] is set to [ON]. For the System menu, contact your dealer.
Course: Selects how to display course; [32 CMPS] (32 compass points), [360°True]
(true bearing), [360°] (360° Relative), [±180°] (180° Relative). [±180°] shows xxxS in
case of starboard direction; xxxP in case of port direction (xxx: 1 to 180). Heading sen-
sor is required to set to [360°True]. [32 CMPS] shows bearing with alphabet indication,
for example, "N", "N/E", "NNE", "NE/N", etc.Only [±180°] is available for the turn angle
of the slant display.
Current Data: Selects how to display tidal current data; [32 CMPS] (32 compass
points), [360°True] (true bearing), [360°] (360° Relative), [±180°] (180° Relative).
Event Mark: Selects how to display event mark data; [32 CMPS] (32 compass
points), [360°True] (true bearing), [360°] (360° Relative), [±180°] (180° Relative).
Other Marks: Selects how to display other mark data; [32 CMPS] (32 compass
points), [360°True] (true bearing), [360°] (360° Relative), [±180°] (180° Relative).
Distance For Shoot: Selects the distance run unit to show the distance run after
shooting the net. The options are miles, meters and feet.
Water Temp: Selects water temperature unit; in °C (Celsius) or °F (Fahrenheit).
Water Temp Range: Selects the time range to show water temperature, 20 Minute, 1
Hour, 6 Hours, 12 Hours or 24 Hours.
7-12