Table of Contents
Advertisement
Chapter 2
Installation
This Chapter covers the physical installation of the WRT-413.
Requirements
•
Network cables connection. Use standard 10/100Base-TX network cables (UTP) with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
•
For Internet Access, an Internet Access account from ISP and either of a xDSL or Cable modem (for WAN
port usage)
•
To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE802.11b or
IEEE802.11g specifications.
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the WRT-413.
Ensure the WRT-413 and the xDSL/Cable modem are powered OFF.
Figure 4: Installation Diagram
2
6
Advertisement
Table of Contents
