Planet WRT-413 User Manual page 35

5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select "Obtain an IP Address automatically ". This is the default in Windows. Using this setting
is recommended. By default, the WRT-413 will act as a DHCP Server.
Restart your PC and ensure it obtains an IP Address from the WRT-413.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before configure the following settings.
•
Enter the WRT-413's IP address in the Default gateway field and click OK. (Your network administrator can
advise you of the IP Address they assigned to the WRT-413.)
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS
address provided by your ISP, then click OK.
Figure 21: TCP/IP Properties (Win 2000)
29