Planet WRT-413 User Manual page 16

If you can't connect WRT-413 configure screen
If the WRT-413 does not respond, check the following:
•
The WRT-413 is properly installed, LAN connection is OK, and it is powered
ON. You can test the connection by using the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the WRT-413's IP Address. (See
next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.0.2 to 192.168.0.254 to be compatible with the WRT-413's default IP
Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0.
See Chapter 4 - PC Configuration for details on checking your PC's TCP/IP
settings.
•
Ensure that your PC and the WRT-413 are in the same network segment. (If
you don't have a router, this must be the case.)
•
Ensure you are using the wired LAN interface. The Wireless interface can only
be used if its configuration matches your PC's wireless settings.
10