Table of Contents
Advertisement
Wireless
Click the Wireless option on the main menu to configure the Wireless settings. A configuration screen will show
below.
Parameters
Identification
Client name
It shows the WRT-413 name..
Select your region from the drop-down list. This field displays the
Region
region of operation for the wireless interface is intended. If your coun-
try or region is not listed, please check with your local government
agency for more information on which channels you are allowed to use,
and select a region which compatible with those channels. (The channel
number will changed according to the selected region.)
SSID is used by all wireless devices within the ESS or extended wire-
SSID
less LAN. The SSID value must be the same on all clients and Access
points in this WLAN.
Options
Mode
Select the desired mode:
•
•
•
Figure 7: Wireless Screen
g & b - Both 802.11.g and 802.11b wireless clients will be able to
connect to WRT-413.
g only - Only 802.11b connections are available.
b only - Only 802.11b connections are available. 802.11g clients
will only be able to use the WRT-413 if they are fully backward-
compatible with the 802.11b standard.
16
Advertisement
Table of Contents
