Appendix B About Wireless Lans; Modes; Bss/Ess; Channels - Planet WRT-413 User Manual

Appendix B
About Wireless LANs
This Appendix provides some background information about using Wireless LANs (WLANs).

Modes

Wireless LANs can work in either of two (2) modes:
•
Ad-hoc
•
Infrastructure
Ad-hoc Mode
Ad-hoc mode does not require an Access Point or a wired (Ethernet) LAN. Wireless Clients (e.g. notebook
PCs with wireless cards) communicate directly with each other.
Infrastructure Mode
In Infrastructure Mode, one or more Access Points are used to connect Wireless Clients (e.g. Notebook PCs
with wireless cards) to a wired (Ethernet) LAN. The Wireless Clients can then access all LAN resources.
Access Points can only function in "Infrastructure" mode,
and can communicate only with Wireless Clients which are
set to "Infrastructure" mode.

BSS/ESS

BSS
A group of Wireless Clients and a single Access Point, all using the same ID (SSID), form a Basic Service Set
(BSS).
Using the same SSID is essential. Devices with different SSIDs are unable to communicate with each other.
ESS
A group of Wireless Clients, and multiple Access Points, all using the same ID (ESSID), form an Extended
Service Set (ESS).
Different Access Points within an ESS can use different Channels. In fact, to reduce interference, it is recom-
mended that adjacent Access Points SHOULD use different channels.
As Wireless Clients are physically moved through the area covered by an ESS, they will automatically change to
the Access Point which has the least interference or best performance. This capability is called Roaming. (Ac-
cess Points do not have or require Roaming capabilities.)

Channels

The Wireless Channel sets the radio frequency used for communication.
B
88