Planet WRT-413 User Manual page 31

3. Select the network adapter you are using.
4. Select "Obtain an IP address from a DHCP Server" or "Specify an IP Address" as explained below.
Obtain an IP address from a DHCP Server
To use DHCP, select "Obtain an IP Address automatically ". This is the default in Windows. Using this setting
is recommended. By default, the WRT-413 will act as a DHCP Server.
Restart your PC and ensure it has obtain an IP Address from your WRT-413.
Specify an IP Address
If your PC is already configured, check with your network administrator before configure the following settings.
1. The Default Gateway is set to the IP address of the WRT-413.
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the WRT-413's IP ad-
dress, as shown in Figure 18 below.
•
If necessary, use the Up button to make the WRT-413 to the first entry in the gateway list.
Figure 17: Windows NT4.0 - IP Address
25