Planet WRT-413 User Manual page 86

Data - Routing Screen
RIP
Enable RIP Check this to enable the RIP (Routing Information Protocol) feature
of the WRT-413.
The WRT-413 supports RIP 1 only.
Static Routing
This list shows all entries in the Routing Table.
Static Routing
Table Entries •
•
•
Properties
•
•
•
Buttons
Save Save the RIP setting. This has no effect on the Static Routing Table.
Figure 49: Routing Screen
The "Properties" area shows details of the selected item in the
list.
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
Network Mask - The Network Mask for the remote LAN seg-
ment. For class "C" networks, the default mask is 255.255.255.0
Gateway IP Address - The IP Address of the Gateway or Router
which the WRT-413 must use to communicate with the destina-
tion above. (NOT the router attached to the remote segment.)
Metric - The number of "hops" (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The de-
fault value is 1.
80