Connection Status - Pptp - Planet WRT-413 User Manual

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen as below will be displayed when the "Connection
Details" button is clicked.
Data - PPTP Screen
Connection
Physical Address The hardware address of this device, as seen by remote devices on the
Internet. (This is different to the hardware address seen by devices on
the local LAN.)
The IP Address of this device, as seen by Internet users. This address
IP Address
is allocated by your ISP (Internet Service Provider).
This indicates whether or not the connection is currently established.
PPTP Status
•
•
Connection Log
•
Connection Log
•
Buttons
Connect When the connection is not established, it will connect to your ISP
after click this button.
Figure 26: PPTP Status Screen
If the connection does not exist, the "Connect" button can be
used to establish a connection.
If the connection currently exists, the "Disconnect" button can be
used to break the connection.
The Connection Log shows status messages relating to the
existing connection.
The "Clear Log" button will restart the Log, while the Refresh
button will update the messages shown on screen.
39