Quick Installation Guide
WDRT-1200AC
1200Mbps 802.11ac Dual-Band Wireless
Gigabit Router
1. Package Contents
Thank you for choosing PLANET WDRT-1200AC. Before installing
the router, please verify the following items in the package box.
Wireless Router
12V / 2A Power Adapter
If there is any item missing or damaged, please
contact the seller immediately.
Note
Step 2: Follow the figure below to connect the network
devices. It depends on your network environment
to connect the WAN port to a cable/xDSL modem,
or the Ethernet directly in your place.
Phone Jack
RJ-11
WAN Port
RJ-45
Cable/xDSL
Modem
Quick Guide
Ethernet Cable
– 1 –
RJ-45
LAN Ports
Power
Power Adapter
– 3 –
2. Hardware Installation
Step 1: Connect the Power Adapter provided in the package
to the WDRT-1200AC. The Power LED on the front
panel will turn on accordingly.
3. Network Configuration (Windows 7)
A computer with a wired Ethernet connection is required for the
first-time configuration of the Wireless Router.
Steps : Set your computer to get an IP address from the
Wireless Router:
1. Click "Start" button located in the lower-left corner of the
screen.
2. Click "Control Panel".
3. Double-click "Network and Sharing Center" icon.
4. Click "Change Adapter Settings".
5. Double-click "Local Area Connection" icon.
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and
click "Properties" button.
7. Select "Obtain an IP address automatically" and
"Obtain DNS server address automatically", and
then click "OK" button twice to save the configuration.
Power
Power Adapter
– 2 –
– 4 –