Planet WRT-413 User Manual page 37

5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select "Obtain an IP Address automatically". This is default in Windows. Using this setting is
recommended. By default, the WRT-413 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the WRT-413.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before configure the following settings.
•
In the Default gateway field, enter the WRT-413's IP address and click OK. Your network administrator can
advise you of the IP address they assigned to the WRT-413.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS
address provided by your ISP, then click OK.
Figure 23: TCP/IP Properties (Windows XP)
31