Planet WRT-413 User Manual page 44

Disconnect
Clear Log
Refresh
Connection Log Messages
Message
Connect on Demand
Manual connection
Reset physical connection
Connecting to remote
server
Remote Server located
Start PPP
PPP up successfully
Idle time-out reached
Disconnecting
Error: Remote Server not
found
Error: PPP Connection
failed
Error: Connection to
Server lost
Error: Invalid or unknown
packet type
after click this button.
If WRT-413 is connecting to your ISP, it will hang up the connec-
tion.
Delete all data of the Log. This will make it easier to read new
messages.
Update the data on screen.
Description
Connection attempt has been triggered by the "Connect auto-
matically, as required" setting.
Connection attempt started by the "Connect" button.
Preparing line for connection attempt.
Attempting to connect to the ISP's server.
ISP's Server has responded to connection attempt.
Attempting to login to ISP's Server and establish a PPP con-
nection.
Able to login to ISP's Server and establish a PPP connection.
The connection has been idle for the time period specified in
the "Idle Time-out" field. The connection will now be termi-
nated.
The current connection is being terminated, due to either the
"Idle Time-out" above, or "Disconnect" button being clicked.
ISP's Server did not respond. This could be a Server problem,
or a problem with the link to the Server.
Unable to establish a PPP connection with the ISP's Server.
This could be a login problem (name or password) or a Server
problem.
The existing connection has been lost. This could be caused by
a power failure, a link failure, or Server failure.
The data received from the ISP's Server could not be proc-
essed. This could be caused by data corruption (from a bad
link), or the Server using a protocol which is not supported by
this device.
38