Cleaning And Maintenance - Elation FOCUS SPOT 250 Manual

CLEANING AND MAINTENANCE

The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to be tightly connected
and must not be corroded.
2. There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
3. Mechanically moved parts must not show any traces of wearing and must not rotate
with unbalances.
4. The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never
use alcohol or solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the
instructions under "Installation instructions".
Should you need any spare parts, please order genuine parts from your local dealer.
©Elation Professional®
Disconnect from mains before starting maintenance operation.
- –
Focus Spot 250™
Focus Spot 250™