Elation FOCUS SPOT 250 Manual page 34

call up to 48 scenes in
Run will run the first 5 scenes you saved in
5. Press ENTER to save and exit.
SC01 - With this function you can choose the number of scenes in your
Program.
1. Access the main menu.
2. Tap the UP button until
3. Tap the UP button until
4. The display shows
can call up to 30 scenes. For example, if
the first 5 scenes you saved in
5. Press ENTER to save and exit.
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until
3. The display will show
SC-01 is displayed, it means you will be editing scene 1, press MODE/ENTER.
You can change the scene number by pressing the UP button.
4. Press MODE/ENTER, the display will show
number. If C-01
press MODE/ENTER. You can change the channel number by pressing the UP
button.
5. The display will show the DMX value for the channel that is being edited. It will be
displayed as
is XX .
6. Adjust the DMX value by pressing the UP button, until you get the expected effect
for this channel.
7. Press MODE/ENTER to enter the editing of the other channels of the scene.
©Elation Professional®
Run . For example, if
EDIT
SC01
SC01 , this stands for the first scene of your program. You
Edit .
EDIT
SC-01 , this stands for the scene number. For example,
is displayed, you will be editing channel 1 of your selected scene,
11XX , it stands for Channel 11 of the editing scene, the DMX value
-
S-05
Edit .
is displayed, press MODE/ENTER.
is displayed.
SC05 , it means that
is displayed. Press MODE/ENTER.
C-1 , this stands for the channel
–
Focus Spot 250™
is displayed, it means that
Run will run
Focus Spot 250™