Cleaning And Maintenance - Elation SIXPAR 300IP User Manual

CLEANING AND MAINTENANCE

CAUTION!
Disconnect power before performing any cleaning or maintenance!
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and an extend-
ed life. The frequency of cleaning depends on the environment in which the fixture operates: damp,
smoky, or particularly dirty environments can cause greater accumulation of dirt on the fixture's
optics.
Clean the external lens surface periodically with a soft cloth to avoid dirt/debris accumulation. Never
use alcohol, solvents, or ammonia based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life. There are no
user serviceable parts inside this fixture. Please refer all other service issues to an authorized Elation
service technician. Should you need any spare parts, please order genuine parts from your local
Elation dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every 3 months, to make sure the
circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out
during normal operation, resulting in damage or injury.
• Check for any deformations on the housing, color lenses, rigging hardware, and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the
fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously
injure a person(s).
• Inspect all moving parts for signs of wear and ensure that they rotate/move without imbalances.
• Electric power supply cables must not show any damage, material fatigue, or sediments. Never
remove the ground prong from the power cable.
23