Elation FOCUS SPOT 250 Manual page 20

Control Board
The control panel located on the top of the fixture allows you to access the main menu and
make all necessary adjustments to the Focus Spot 250™. During normal operation, tapping
the "MODE" key once will access the fixture's main menu. Once in the main menu you can
navigate through the different functions and access the sub-menus with the Up and Down
buttons. Once you reach a field that requires adjusting, tap the ENTER button to activate
that field and use the UP and Down button to adjust the field. Tapping the Enter button once
more will confirm your setting. Once a setting is saved the LED will briefly readout PASS to
confirm a new setting has been made and locked into memory. You may exit the main menu
at any time without making any adjustments by tapping the EXIT button.
Default settings shaded.
1 ADDR A001~A511
2 TEST T-01~T-XX
3 AUDI MSTR
ALON
4 LAMP ON/OFF
5 RESE ALL
SCAN
COLR
GOBO
SHTR
OTHR
6 TIME LIFE
LAMP
CLMP
7 RPAN ON/OFF
8 RTLT ON/OFF
9 FINE ON/OFF
10 DISP VALU
D ON
FLIP
11 SPEC LAAU
DLOF
©Elation Professional®
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
0000~9999
0000~9999
ON/OFF
D–XX D-00 (DXXX)
ON/OFF
ON/OFF
ON/OFF
ON/OFF
-
Indicate the staring DMX address
A001 also is the setting for slave
Automatically test the function
Runs fixture as "master" for audio
Runs fixture as "alone" for audio
Manually switches lamp "on" and "off"
Reset all motors and returns fixture to
home
Reset only motors for pan/tilt
Reset only motors for colors
Reset only motors for gobo and
rotation
Reset only motors for shutter and/or
dimmer
Reset other motors
Displays the total fixture running time
Displays a lamps running time
Clear lamp running time
Reverses the pan movements
Reverses the tilt movements
Switch between 16 bit/8 bit
Display the DMX512 value of each
channel
Display turn off after 2mins
This function will reverse the display
180
Automatic lamp start with power
Switch lamp via DMX
–
Focus Spot 250™
Focus Spot 250™