Display Menu - Elation FOCUS SPOT 250 Manual

SHTR - Resets the shutter motors.
OTHR - Reset all other motors
6. TIME MENU -
LIFE - Displays the fixtures total running time.
LAMP - Displays the lamp running time.
CLMP - Clears the lamp running time.
7. RPAN MENU -
This menu setting reverses the Pan movements.
8. RTLT MENU -
This menu setting reverses the Tilt movements.
9. FINE MENU -
This menu setting switch between 16 bit (fine) and 8 bit (coarse) modes. When this function
is turned on the fixture will operate in 16 bit (fine) mode. When functioning in 16 bit mode the
fixture will use 11 DMX channels, when the 16bit function is turned off the fixture will use
nine DMX channels.
10.

DISPLAY MENU -

VALU (DMX-512 Value) - Display the DMX-512 value of each channel.
D ON (Display On) - Turns digital display on or off.
FLIP - "Flips" the digital display 180 degree
11. SPEC MENU –
LAAU-Automatic lamp start with power
DLOF-Switch lamp via DMX controller
DLAY-Lamp delay on time
SPOT - This provides a spot beam for better lamp optimization.
DFSE (Default) - Resets the unit to default.
©Elation Professional® - –
Focus Spot 250™
Focus Spot 250™