Preparation And Installation - Elation FOCUS SPOT 250 Manual

Focus Spot 250™

Preparation and Installation

Mounting
The FOCUS SPOT 250™ is fully operational in two different mounting positions, hanging
upside-down from a ceiling or set on a flat level surface. To avoid internal damage to the unit,
never mount the unit on its side as illustrated below. Be sure this fixture is kept at least 0.5m
away from any flammable materials (decoration etc.). Install a safety cable that can hold at
least 10 times the weight of the fixture. Never use the carrying handles for secondary
attachment.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE
0711-217 for proper installation in Europe
To ensure proper installation, only qualified staff should
attempt installation.
Clamps
The FOCUS SPOT 250™ has been designed to hold multiple clamps to the bottom of the
unit in several different orientations. Always use an appropriately rated clamp to mount this
unit to truss. Refer to the printed instructions on the bottom of the fixture for proper clamp
installation.
©Elation Professional® - – Focus Spot 250™