Table of Contents
Advertisement
C L E A N I N G A N D M A I N T E N A N C E
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and
an extended life. The frequency of cleaning depends on the environment in which the
fixture operates: damp, smoky or particularly dirty environments can cause greater
accumulation of dirt on the fixture's optics.
Clean the external lens surface at least every 20 days with a soft cloth to avoid
dirt/debris accumulation. NEVER use alcohol, solvents, or ammonia based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside this fixture, please refer all other service issues to
an authorized Elation service technician. Should you need any spare parts, please order
genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
A detailed electric check by an approved electrical engineer every three months, to make
sure the circuit contacts are in good condition and prevent overheating.
Be sure all screws and fasteners and accessories are securely tightened at all times. Lose
screws may fall out during normal operation resulting in damage or injury as parts could fall.
Check for any deformations on the housing, lenses, rigging hardware and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter
into the fixture. Damaged rigging points or unsecured rigging could cause the fixture to
fall and seriously injure a person(s).
Electric power supply cables must not show any damage, material fatigue or sediments.
Never remove the ground prong from the power cable.
C
A
Disconnect power before cleaning or maintenance.
U
T
I
19
O
N
www.elationlighting.com
Advertisement
Table of Contents
