Elation FOCUS SPOT 250 Manual page 33

5. Press ENTER or EXIT/DN to exit. EDIT - This menu item allows you to write a
program into the memory (EEPROM) via the control panel or via the external
controller.
12. EDIT MENU -
This features allows you to enter and store a preset show in to the fixtures internal
memory. This show can then be recalled at anytime without a controller.
RUN - With the function
set the number of steps under Step (S-01- S-48). You can edit the individual scenes
under Edit.
1. Access the main menu.
2. Tap the UP button until
3. Tap the UP button until
4. "AUTO is displayed. If you press the UP button it will show
which one you want to activate, and press ENTER.
5. Press UP, to select
master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
STEP - With this function you can program the number of steps in your
individual Program.
1. Access the main menu.
2. Tap the UP button until
3. Tap the UP button until
4. The display shows
©Elation Professional®
RUN", you can run your pre-made program. You can
EDIT is displayed, press MODE/ENTER.
RUN is displayed, press MODE/ENTER.
ALON or NAST . Which mean stand alone, and
EDIT is displayed, press ENTER.
STEP is displayed, press ENTER.
S-01 , this stands for the first step of your program. You can
- –
Focus Spot 250™
SOUN . Select
Focus Spot 250™