Table of Contents
Advertisement
9. DISPLAY MENU
On-Board System Menu: The Design PAR Zoom™ comes with an easy to navigate system
menu. This next section will detail the func tions of each command in the system menu.
LED Control Panel: The control panel located on the base of the fixture allows you to
access the main menu and make all necessary adjustments to the Design Par Zoom™ .
During normal operation, tapping the " MENU" key once will access the fixture' s main menu.
Once in the main menu you can navigate through the different functions and access the
sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting,
tap the ENTER button to activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting. Once a setting is saved
the display will briefly readout OK to confirm a new setting has been made and locked into
memory. You may exit the main menu at any time without making any adjustments by
tapping the MENU button.
MENU Button - To access the main menu locate the MENU button on the front of the unit.
Press this button to activate the system menu. Tap the UP button until you reach the function
you wish to change. When you reach the function you wish to change tap the ENTER button
once to select that menu function. When a function is selected, use the UP or DOWN button
to change the function. Once your changes are made tap the ENTER button yet again to
lock the change in the system menu. To exit without making any changes tap the MENU
button.
0 MODE
ADDR
RUN
©Elation Professional, Los Angeles Ca.
VALU
SLAV
RDMX
AUTO
SOUN
A001~XXX
(AXXX)
ON/OFF
(SLAV)
ON/OFF
ALON
(AU-A)
MAST
(AU-M)
ALON
(SO-A)
19
DLED Par Zoom
DMX address setting
Slave setting
Change DMX address
via external controller
Automatic Run in Stand
Alone
Automatic
Run
Master
Sound-controlled Run
in Stand Alone
www.ElationLighting.com
™
as
Advertisement
Table of Contents
