Display Menu - Elation ELAR Tri Brick Manual

9. DISPLAY MENU

Default settings shaded.
<ADDR>
<RUN>
MODE
<DISP>
<CHAN>
<FAIL>
SET
<DFSE>
<VER>
<CH01>
MANL
~<CH09>
<LIFE>
TIME
<CODE>
<CLFE>
<STEP>
EDIT
<SC01>
~<SC48>
Remarks:
1) If the fixture does not receive a DMX signal the menu display will flash
repeatedly.
2) TIME: Adjust the hold time for each scene in built-in chase programs.
3) FADE: Adjust the fade time between each scene in the built-in programs.
9.1 "MODE" - Function Mode:
9.1.1 <ADDR> - DMX address setting – This function is used to set or adjust the
fixture's starting DMX address. Every device controlled by DMX has to have a unique
starting address. The addressing feature is what allows DMX to function properly. The
DMX address of a fixture is what allows it to communicate with a controller properly. The
DMX addressing also allows the fixture to ignore any DMX information coming from the
controller that is not meant specifically for the fixture. Because each fixture is connected
©Elation Professional, Los Angeles Ca.
VALU
SLAV
RDMX
AUTO
VALU
FLIP
D ON
4CH/5CH/7CH/9CH
OFF/HOLD/AUTO
ON/OFF
V-1.0~V-9.9
01 XX (00~FFH)
09 XX (00~FFH)
0000~9999(hours)
CXXX
ON/OFF
S-01~S-48
C-01~C-09
FADE
TIME
A001~AXXX (AXXX)
ON/OFF
ON/OFF
ALON/MAST
D-XX D-00(DXXX)
ON/OFF
ON/OFF
01 XX (00~FFH)
09 XX (00~FFH)
XXX
XXX.X (000.1s~999.9s)
20
ELAR Tri Brick
DMX address setting
Set as Slave
Change address via DMX
Run Auto program
Display DMX value
Flip display
Delay shutting off LED display
DMX channel Mode
Status while there is no DMX
Default setting
Software version
Manual adjust intensity
Life time of machine running
Password of clear time "038"
Clear machine running time
Select steps of program
Edit the internal scenes
www.ElationLighting.com
™