Slide Synchronizer Adapter By Kodak Australia - Kodak EKTAPRO 9020/CINE Service Manual

SM 2547-1

SLIDE SYNCHRONIZER ADAPTER by KODAK AUSTRALIA

Kodak Australia offers an own solution of a slide synchronizer adapter. This unit is built in the IR Receiver
housing and is therefor directly to be plugged onto the remote socket. A 6pin socket is built into the housing.
The system supports most of traditional AV cassette recorders. The S-AV cable remote can also be used with
the possibility to give transport commands and to focus. Speaker desk (lecterns) installations can be fully used.
The system is able to switch the Projector into the standby mode (press forward and reverse button
simultaneously) or run to the Projector to the zero position (press and hold down forward and reverse button).
EKTAPRO IR
Receiver Housing
with built in Slide
Synchronizer Adapter
Kodak AG, Stuttgart
NOTE
The S-AV Timer does not work on this adapter!
Professional AV Cassette
Recorder
figure 2-21
2-17
Speaker´s Desk
S-AV Remote Control
Service Manual
03/98