Lower Housing - Kodak EKTAPRO 9020/CINE Service Manual

SM2547-1

LOWER HOUSING

1
. Remove the UPPER HOUSING. See page 4-1.
2
. Remove the CENTER HOUSING. See page 4-4.
3
. Remove the FAN, KEYBOARD PCB and TRAY MOTION PCB. See page 4-9
4
. Remove the TRANSFORMER, POWER SUPPLY PCB and BACK PANEL ASSEMBLY. See page 4-11.
5
. Remove the MECHANISM FRAME and LENS MOUNT. See page 4-13.
6
. Disconnect all CONNECTORS from MASTER PCB. See page 4-23:
7
. Remove the 2 SCREWS and the LAMP HOUSING ASSEMBLY.
8
. Remove the HANDLE.
9
. Remove the 2 ELEVATOR RETAINERS, the right and left ELEVATOR KNOB, the right and left
ELEVATOR and the 2 RUBBER FEET.
HANDLE
Kodak AG, Stuttgart
ELEVATOR RETAINER (2)
ELEVATOR KNOB (2)
ELEVATOR (2)
RUBBER FOOT (2)
figure 4-29
4-25
Service Manual
LAMP HOUSING
ASSEMBLY
SCREW (2)
03/98