SM 2547-1
EKTAPRO Model 7020
Features and Functions:
All features and functions as Model 4020.
Additional features:
Application Slot
Bus CONNECTORS (RS232) :
Address Switch
Initializing procedure
High Light
If the parallel Mode "970*" is set on the IR Remote Control it is possible to toggle with "666*" between two
projectors to control the focus functions. These functions are only visible on the screen.
Kodak AG, Stuttgart
figure 2-3
:
for Kodak and OEM ADAPTERS
IN (female) and OUT (male)
:
16 addresses can be selected
:
After power on the Projector the SLIDE LIFTER and the RING DRIVE
will be checked, the LAMP and the FAN will be switched off
:
20% more light output, lamp life time approx. 30% reduced
NEW (only on Models 7020/9020)
2-5
Service Manual
03/98