Function Codes This label is designed to be fixed on the rear of your IR Remote System (transmitter). Function Code • Dissolve times 801 - 899 (0.1 - 9.9 s) Random Access 0-160 Fade: MASTER SLAVE Alternate Freeze • Independent Projector Control Mode •...
Page 3
7020, 9010 and 9020 Slide Projectors cable, they behave like individual projectors and can also One of the important new features of the KODAK EKTAPRO be operated individually as usual via the keypad. 7010, 7020, 9010 and 9020 Slide Projectors is the integrated •...
COMMANDS AND EFFECTS Overview Examples: DISSOLVE The following table gives and If you want a dissolve time of Basic setting 1 s : Input <810> and confirm with <*>. overview of all commands and effects. After switching on you can 5.5 s : Input <855>...
Page 5
*Random Access Further control facilities *FREEZE (789) You select slides in 2 projector dissolve With the commands “Fade With the Freeze command a soft according to the slide number of your MASTER”, “Fade SLAVE” and dissolve can be stopped at any time presentation and not according to the “Alternate”...
Page 6
Transport control on the MASTER: hitches” can occur if the presenter *AUTOTIMER (600...660) The slide transport runs, as usual, via presses the wrong button on the remote A Timer function can also be set via the the two transport buttons. control by accident.
Page 7
Slide Sorter Aid Position Position Position Position Position Position Position Position Slide Slide Slide Slide in SLAVE in SLAVE in SLAVE in SLAVE MASTER MASTER MASTER MASTER tray tray tray tray tray tray tray tray...