KODAK 1.8x Magnifying LED - Slide Viewer Manual

SPECIFICATIONS

• Product type: Slide viewer
• Dimensions: 2.4" x 6.1" x 0.9" (62 x 155 x 24 mm)
• Weight: 0.3 lbs. (132 g)
• Power source required: Yes (battery powered)
• Power source: 4 x 1.5 V AA batteries (not included)
• Light source: LED
• Magnification: 1.8x
• Compatible slides: 35mm slides
• Installation required: No
• Adult assembly required: No
• Additional tools required: No
• Country of origin: China
• Warranty included: Yes
• Warranty length: 1 year

PACKAGE CONTENTS

• KODAK 1.8x Magnifying LED Slide Viewer
• User guide

SAFETY PRECAUTIONS

Please read all safety precautions and instructions carefully before using this product.

• Do not attempt to disassemble this device for any reason.
• Do not try to open the device's casing or attempt to modify it in any way. Doing so could create the risk of serious accident or injury and will void the product's limited warranty.
• Maintenance and repairs to this product should always be performedexclusively by authorized service providers. Do not attempt to repair this product on your own.
• 
  Keep the unit away from all types of moisture, as this could damage theinternal components and create the risk of fire and electrical shock.
• Never operate the unit with wet hands, as you could damage the productor cause serious injury to yourself.
• Never use the unit in the rain or snow.
• To avoid the risk of accidents, choking hazards, or damaging the unit, keep it and all included accessories out of the reach of children and/or animals.
• Batteries are not included. When inserting batteries, make sure that thepositive and negative polarities match with the markings in the compartment.
• Do not mix old and new batteries together.

PRODUCT OVERVIEW

1. Lens cover
2. Power light
3. Power switch
4. Magnifying glass
5. LED backlight
6. Battery compartment
7. Neck lanyard

INSTALLING BATTERIES

1. Remove the battery door from the bottom of the slide viewer.
   
2. Insert four (4) AA batteries (not included) into the battery compartment.
   
3. Close the compartment with the battery door.
   

VIEWING A SLIDE

1. Fold out the lens cover to position the magnifying lens over the backlight.
   
2. Move the power switch to the ON position to turn on the backlight.
3. To view a slide, place it over the backlight and under the magnifying lens.
   
4. When you are finished using the unit, fold up the magnifying lens and turn off the device.
   

CARE & MAINTENANCE

• When storing for an extended length of time, remove the batteries fromthe battery compartment and store the slide viewer in a dry place.
• Clean the magnifying lens with a soft dry cotton cloth or lenscleaning paper.

CUSTOMER SERVICE

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.

Should you experience any problems with your product, please contact us before returning the item to the place of purchase.

We're here to help!

U.S. Support: kodak@camarketing.com, 844-516-1539
International Support: kodakintl@camarketing.com, 844-516-1540

www.kodakphotoplus.com
The Kodak trademark, logo, and trade dress are used under license from Eastman Kodak Company.
All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.
Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA.
© 2022. C&A IP Holdings LLC. All Rights Reserved. Made in China.

Documents / Resources

References

• Kodak Photo Plus - Printomatic Instant Print Camera

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download KODAK 1.8x Magnifying LED - Slide Viewer Manual