Master Board Pcb - Kodak EKTAPRO 9020/CINE Service Manual

Service Manual

Master Board PCB

1
. Remove the UPPER HOUSING. See page 4-1.
2
. Remove the CENTER HOUSING. See page 4-4.
3
. Remove the FAN, KEYBOARD PCB and the TRAY MOTION PCB. See page 4-9.
4
. Remove TRANSFORMER, POWER SUPPLY PCB and BACK PANEL ASSEMBLY. See page 4-11.
5
. Remove the MECHANISM FRAME and LENS MOUNT. See page 4-12.
6
. Disconnect all CONNECTORS from the MASTER PCB. See page 4-23:
7
. Remove the SCREW and the COVER.
8
. Remove the MASTER PCB.
COVER
SCREW
03/98
MICROCONTROLLER
figure 4-28
4-22
SM2547-1
MASTER BOARD PCB
Kodak AG, Stuttgart