Configuring A Filter Set - ZyXEL Communications ZyWALL 10/10 User Manual

ZyWALL 10/10 II/50 Internet Security Gateway
You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter
set having up to six rules, you can have a maximum of 24 rules active for a single port.

18.2 Configuring a Filter Set

To configure a filter set, follow the procedure below. For more information on menus 21.2 and 21.3, please
see the firewall chapters.
Step 1.
Select option 21. Filter Set Configuration from the main menu to open menu 21.
Step 2. Enter 1 to bring up the following menu.
18-4
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
3. View Firewall Log
Figure 18-4 Menu 21 — Filter and Firewall Setup
Enter Menu Selection Number:
Filter Configuration