Tel/Fax Auto Switching Mode; Manual Receiving Mode - Toshiba e-STUDIO170F Owner's Manual

TEL/FAX Auto Switching Mode

This mode is used when the line is used for both facsimile and telephone.
The facsimile automatically determines whether an incoming call is for facsimile or telephone. When
the call is for telephone, the ringer will ring according to the value set for the call time. When the call
is for facsimile, the machine will automatically start receiving the document.
If the other party is sending a document, the facsimile automatically receives the document. If the
other party is making a phone call, the facsimile goes on to generate a pseudo-rings.
(1) Caller in Automatic
Facsimile Transmission
Mode
(3) Caller in Manual
Facsimile Transmission
Mode
(2) Caller in Attempting a
Phone Call
(1) Caller in Automatic Facsimile Transmission Mode
Detects the facsimile signal and the facsimile will engage Auto Reception mode.
(2) Caller in Manual Facsimile Transmission Mode
If you pick up the handset of the external telephone during the Pseudo Ringer period, you can
talk with the caller, then press
period ends (because no one answers), the facsimile is automatically switched to Facsimile Re-
ception mode. In this mode, the remote party can manually send a document as well.
(3) Caller Attempting a Phone Call
You can talk with the caller if you pick up the handset of the external telephone during the
Pseudo Ringer period. When using a connected external telephone, you must press
talk with the caller.
Detects the facsimile signal
Pseudo ringer
No-sound status
1 to 15 times (Refer to 63)
(About 5 seconds)
Automatic receiving
Note:
A telephone fee on the caller's side will be charged to
the caller during the Pseudo Ringer period. Inform the
calling patry of this fact.Also note that the Pseudo-
ringer is not generated on a telephone connected in
parallel.
START
to start receiving a document. When the Pseudo Ringer

Manual Receiving Mode

"MANUAL RECEIVE" allows you to use the facsimile as a tele-
phone (talking function) first and then start a document reception
by pressing:
1. When the facsimile rings, pick up the handset and talk with
the remote party.
2. If you hear the facsimile tone through the handset instead of
Facsimile
an operator's voice, you may manually initiate a facsimile re-
Automatic
Reception
ception by pressing:
Mode
Answer by the connected telephone. If
3. Replace the handset to the cradle. The facsimile will start re-
you pick up the the connected
ceiving the document.
telephone, you must press the STOP
key on the facsimile.
STOP
to
START
START
103