Default Setting For Security Transmission - Toshiba e-STUDIO170F Owner's Manual

Default Setting for Security Transmission

This function allows transmis-
1
sions only when the number
you dial matches the number
programmed in the remote fac-
simile. If the numbers do not
Press:
match, Security Transmission
prevents your facsimile from
sending by indicating a trans-
mission error.
NOTE:
The remote facsimile's Ter-
minal ID (TTI) must be set
with the correct phone num-
ber. Otherwise, a transmis-
sion error will occur.
2
Display the
SECURITY TX Menu
Select the desired option.
MENU
To set Security Transmission
to ON, press:
+
+
To set Security Transmission
to OFF, press:
+
+
SECURITY TX
2.OFF
Returns to display the SETUP
1.ON
menu screen.
3
Select the Desired
Option
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
COMPLETED
NOTE:
Telephone numbers are
Displayed for 2 seconds verified by their last 5 digits.
Select Another
SETUP Item, or ...
STOP
143