Preparation For Transmission; Switching To The Fax Mode - Toshiba GD-1200 Operator's Manual

2. Preparation for Transmission

Switching to the Fax mode

1
Press the [FAX] button on the control
panel to select the Fax function.
2
• Be sure to switch over to the Fax mode before carrying out Fax
operations.
• If you leave the equipment for about 45 seconds, it automatically
returns to the copy mode.
• You can also switch to the Fax mode when the equipment is in
the energy-saving mode.
When the use of the equipment is managed under certain functions such as department management
When the use of the equipment is managed under the department management or the user management,
each user needs to enter the department code, user ID, password, etc. For these operations, see the
Operator's Manual for Basic Function.
22
2.SENDING A FAX