Communication Report Print - Toshiba e-STUDIO170F Owner's Manual

Communication Report Print

You can request a communica-
1
tion report every time a docu-
ment is sent. If you desire a
communication report every
time you send a document, set
Load the document face down
this function to ON as a default
in the Document Support (see
(see page 178).
page 82).
If you plan to use communica-
Adjust the resolution and con-
tion reports only occasionally,
trast if desired (see pages 83
use this procedure. The TX Re-
and 84).
port key allows you to obtain a
report for one communication
only.
You can activate this option
while programming an Abbrevi-
ated Dial Number (see page
65) or One Touch Dial Key set-
ting (see page 71) if communi-
cation with a specific remote
party always requires this op-
tion.
2
Load the Document
Select the function key on the
Operation Panel.
Press:
JAN-31 09:43 AM 100% TX REPORT
AUTO RECEIVE 1.ALWAYS
2.ON ERROR
3
Display the TX Select the Option
REPORT Menu
To set the e-STUDIO170F to
always print a communication
report, press:
TX REPORT
To set the e-STUDIO170F to
only print a communication re-
port when an error condition is
encountered, press:
3.OFF
To set the e-STUDIO170F to
never print a communication
report, press:
JAN-31 09:43 AM
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
80%
177