Finishing Using Post Inserter; Separate Scan - Konica Minolta bizhub C652 User Manual

5.1 Basic

Finishing using Post Inserter

1
2
3
5.1.7

Separate Scan

When the original contains pages exceeding the capacity of the ADF, you can divide the original into several
batches to handle each lot as a single copy job. You can also use the copy function by switching between
the ADF and the original glass for scanning the originals.
0
0
1
2
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Place paper in the lower tray of the Post Inserter, and align the lateral guide to the paper size.
% Set the paper by placing it so that its top side faces the back of the machine.
% To use the corner staple or 2-staple option, load the paper face up.
% To perform Punch, load the paper face up.
% To perform Bind, load the front side of the bound paper face down.
% To perform Tri-Fold, load the outside of the tri-folded paper face down.
Press [Finishing] key and [Select punch] key, and select the desired finishing.
% To configure Finishing settings, press [Finishing] key to turn the LED on. To configure punch
settings, press [Select punch] key to turn the LED on.
% Punch settings are available together with the corner staple or 2-staple option.
Press the [Start/stop] key.
% If [Start/stop] key is pressed during operation, the operation will be stopped.
Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling
of the original or failure of the machine.
When making 2-sided or combined copies using the original glass, the machine can scan a number of
original pages without enabling Separate Scan.
Load the original.
In the Basic tab, press [Separate Scan].
ABC
ABC
Front
Cover
5
ABC ABC
F ro n t
C o v e r
5-13