Hdd Settings - Konica Minolta bizhub C652 User Manual

7.10 Security Settings
Administrator Settings
System Connection / OpenAPI Setting
Security Settings / User Box Administrator Setting
Security Settings / Security Details / Password
Rules
Security Settings / Security Details / Prohibited
Functions When Authentication Error
Security Settings / Security Details / Prohibited
Functions When Authentication Error / Release
Time Settings
Security Settings / Security Details / Confidential
Document Access Method
Security Settings/Security Details/Print Data Cap-
ture
Security Settings/Security Details/Hide Personal
Information (MIB)
Security Settings / Security Details / Initialize / Net-
work Settings
Security Settings/Security Details/Job History
Thumbnail Display
Security Settings / Image Log TX Setting
Review Secure Print User Box
[Network] in PageScope Web Connection / E-Mail
Setting / S/MIME
[Maintenance] in PageScope Web Connection /
Reset / Network Setting Clear
[Security Administrator] in PageScope Web Con-
nection / Password Setting
CS Remote Care
If [Enhanced Security settings] is enabled, various security functions are configured to allow you to ensure
the higher-level security of data management. For details, contact your service representative. To enable the
enhanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6

HDD Settings

This setting is for the hard disk operations. For details, refer to the "User's Guide [Box Operations]".
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Settings to forcibly changed
Set to [SSL Only].
Set to [Restrict].
Set to [Enable].
Set to [Mode 2], and the number of tries is set to 3.
• The number of tries can be changed to 1, 2, or
3.
The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
Set to [Mode 2].
Set to [Restrict].
Set to [ON].
[Network Settings] is not displayed.
Set to [OFF].
Set to [OFF].
Only the list is displayed before the password au-
thentication is performed.
[Automatically Obtain Certificates] is set to [No].
[E-Mail Text Encryption Method] is set to [3DES].
[Network Setting Clear] is not displayed.
[Administrator Password Setting] is not displayed.
Restricts the device setting in the remote mode
based on CS Remote Care.
7
7-55