Konica Minolta bizhub C652 User Manual page 134

Hide thumbs Also See for bizhub C652:
Table of Contents

Advertisement

6.1
System Settings
Settings
Auto Paper Select for Small
Original
Blank Page Print Settings
Page Number Print Posi-
tion
Select Keyboard
Factory default
Language Selection
Measurement Unit Settings
Auto Tray Selection Set-
tings
Auto Tray Switch ON/OFF
No Matching Paper in Tray
Setting
Print Lists
Post Inserter Settings
Paper Type
Paper Size
Auto Color Level Adjust.
Low Power Mode Settings
Sleep Mode Settings
Print/Fax Output Settings
Output Tray Settings
AE Level Adjustment
Auto Paper Select for Small
Original
Blank Page Print Settings
Page Number Print Posi-
tion
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Specify the paper size to be used for a case where the document placed
on the original glass is too small to be detected in Auto Paper mode.
Copy on Small Size
Prints on 5-1/2 e 8-1/2 (A5) paper.
Copy on Letter (Copy
Prints on 8-1/2 e 11 (A4) paper.
on A4)
Prohibit Copy
Starts printing when a paper tray is selected man-
ually and the [Start] key is pressed.
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-26.
Specify a page number print position when printing page numbers after
configuring 2-sided print or booklet settings. Select whether to print the
page numbers on a same position on all pages or on positions symmetric
with respect to the stapling position.
Select the keyboard type displayed by default in the touch panel.
English
This value varies depending on the area.
Tray Priority
Tray 1 ö Tray 2 ö Tray 3 ö Tray 4 ö LCT
LCT is displayed when the optional LCT is installed.
Restrict
Stop Printing (Tray Fixed)
Tray 1
1-Sided
Paper Tray: F1
Paper Type: Plain Paper
Paper size: Auto Detect
Plain paper
Auto Detect
Standard (3)
15 min.
30 min.
Print: Page Print
Fax: Batch Print
Copy: Tray 2
Print: Tray 2
Print Reports: Tray 1
Fax: Tray 1
[Output Tray] is displayed when the Finisher FS-526, Finisher FS-527, or
Job Separator JS-504 is installed.
[Tray 3] is displayed if the Job Separator JS-603 is installed in the Finisher
FS-527.
Standard (2)
Prohibit Copy
Do Not Print
Left & Right Bind: All the Same
Top & Bottom Bind: All the Same
If 5-1/2 e 8-1/2 (A5) paper is not loaded in the
tray, a message that instructs you to load 5-
1/2 e 8-1/2 (A5) paper in the bypass tray ap-
pears.
6
6-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub c652dsBizhub c552Bizhub c552dsBizhub c452

Table of Contents