Finishing Using Post Inserter - Konica Minolta bizhub C652 User Manual

5

Finishing using Post Inserter

1
Place paper in the lower tray of the Post Inserter, and align the lateral guide to the paper size.
% Set the paper by placing it so that its top side faces the back of the machine.
% To use the corner staple or 2-staple option, load the paper face up.
% To perform Punch, load the paper face up.
% To perform Bind, load the front side of the bound paper face down.
% To perform Tri-Fold, load the outside of the tri-folded paper face down.
2
Punch settings are available together with the corner staple or 2-staple option.
% To configure Finishing settings, press [Finishing] key to turn the LED on. To configure punch
settings, press [Select punch] key to turn the LED on.
% Press [Finishing] key and [Select punch] key, and select the desired finishing.
3
Press the [Start/stop] key.
% If [Start/stop] key is pressed during operation, the operation will be stopped.
5-14 bizhub C652/C652DS/C552/C452 (Version 2)
Basic 5.1