Leading Edge Adjustment; Centering - Konica Minolta bizhub C652 User Manual

7.1 System Settings
Factory default
Color Registration Adjust
Prior Detection Setting
Prior Detection Setting
(front)
Prior Detection Setting
(back)
Feed Cleaning Settings
Non-Image Area Erase Op-
eration Settings

Leading Edge Adjustment

Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed
direction).
1
2
3
4
5
6

Centering

Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction).
0
1
2
3
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
0 dot
Yes
Warning Display: TYPE1
Detection Level: Std.
Yes
Warning Display: TYPE1
Detection Level: Std.
Remove
Erase Operation: Specify
Erase Method: Rectangular
Original Density: 3
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Leading Edge Adjustment].
% To adjust the starting print position at the leading edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].
Select a paper type to be adjusted.
Load the paper into the bypass tray.
Press the [Start] key.
A test pattern is printed.
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 4.2 mm.
% Press [+] or [-] to adjust the width.
Press the [Start] key to print a test pattern.
Press [OK].
Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the bypass tray.
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Centering].
% To adjust the starting print position at the left edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Centering (Duplex 2nd Side)].
Select a paper tray to be adjusted.
Press the [Start] kay.
A test pattern is printed.
7
a
a:4.2mm
7-13