Reset Settings - Konica Minolta bizhub C652 User Manual

7.1 System Settings
7.1.9

Reset Settings

Configure auto reset settings.
0
0
%
Settings
System Auto Reset
Auto Reset
Job Reset
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
All settings performed in the following tabs during operation using the copy function are automatically
reset to the initial settings after the specified time has elapsed.
Basic tab, Original Setting tab, Quality/Density tab, Application tab
Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates when
this machine is not used for one minute during user authentication/account track operations.
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Reset Settings].
Priority Mode
System Auto Reset
Time
Configure whether to perform auto reset in the selected mode.
Specify a time until the basic settings screen appears and the settings are
reset to the initial values if this machine is not operated.
When Account is
changed
When original is set
on ADF
Next Job
Configure a mode to be displayed in the system
auto reset mode.
Configure whether to perform system auto reset.
Specify a time until the initial screen appears if
this machine is not operated. The specified time
is not canceled.
d
Reference
If user authentication or enhanced se-
curity mode is enabled, the adminis-
trator settings mode or user
authentication mode is logged off ac-
cording to the setting for System Auto
Reset Time.
In the enlarge display mode, the sys-
tem auto reset mode is disabled.
Configure whether to reset the settings when you
log off if the user authentication or account track
settings have been configured.
Configure whether to reset the settings when an
original is loaded in the ADF.
Configure whether to reset the following settings
when the next job is selected.
• Staple Setting
• Original Set/Bind Direction
• Reset Data After Job
The destination of data is always reset.
7
7-23