Appendix D Default Settings And Technical Specifications; Factory Default Settings - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

Factory Default Settings

For information about restoring the VPN firewall to factory default settings, see
Factory Default Settings
The following table shows the default configuration settings for the VPN firewall:
Table 51. VPN firewall factory default configuration settings
Feature
Login settings
User login URL
Administrator user name (case-sensitive)
Administrator login password (case-sensitive)
Guest user name (case-sensitive)
Guest login password (case-sensitive)
WAN settings
WAN IPv4 mode (all WAN interfaces)
WAN IPv4 load balancing settings (all WAN interfaces)
WAN IPv6 mode (all WAN interfaces)
Stateless IP/ICMP Translation (SIIT)
WAN MAC address (all WAN interfaces)
WAN MTU size (all WAN interfaces)
Port speed (all WAN interfaces)
Secondary IPv4 WAN addresses
Dynamic DNS for IPv4
WAN QoS profiles for IPv4
on page 555.
Default Settings and Technical Specifications
671
Revert to
Default Behavior
https://192.168.1.1
admin
password
guest
password
NAT
Primary WAN mode
IPv4 only mode
Disabled
Use default MAC addresses of the
VPN firewall.
1500 bytes
1492 bytes for PPPoE connections
AutoSense
None
Disabled
None