NETGEAR FVS336Gv3 Reference Manual page 124

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Setting Description
Start IP Address Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCP client joining the LAN is
assigned an IP address between this address and the end IP address. For the
default VLAN, the default start IP address is 192.168.1.100.
End IP Address Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCP client joining the LAN is
assigned an IP address between the start IP address and this IP address. For the
default VLAN, the default end IP address is 192.168.1.254.
The start and end DHCP IP addresses must be in the same network as the LAN
IP address of the VPN firewall (that is, the IP address in the IP Setup section as
described earlier in this table).
Primary DNS Server This setting is optional. If an IP address is specified, the VPN firewall provides this
address as the primary DNS server IP address. If no address is specified, the
VPN firewall uses the VLAN IP address as the primary DNS server IP address.
Secondary DNS Server This setting is optional. If an IP address is specified, the VPN firewall provides this
address as the secondary DNS server IP address.
WINS Server This setting is optional. Enter a WINS server IP address to specify the Windows
NetBIOS server, if one is present in your network.
Lease Time Enter a lease time. This specifies the duration for which IP addresses are leased
to clients.
Enable LDAP To enable the DHCP server to provide Lightweight Directory Access Protocol
information (LDAP) server information, select the Enable LDAP information check box.
Enter the following settings:
•
•
•
DNS Proxy
Enable DNS Proxy This setting is optional. To enable the VPN firewall to provide a LAN IP address for
DNS address name resolution, select the Enable DNS Proxy check box. This
feature is disabled by default.
Note:
in the VLAN receive the DNS IP addresses of the ISP but without the DNS proxy
IP address.
LDAP Server. The IP address or name of the LDAP server.
Search Base. The search objects that specify the location in the directory
tree from which the LDAP search begins. You can specify multiple search
objects, separated by commas. The search objects include the following:
- CN (for common name)
- OU (for organizational unit)
- O (for organization)
- C (for country)
- DC (for domain)
For example, to search the netgear.net domain for all last names of Johnson,
enter the following objects:
cn=Johnson,dc=Netgear,dc=net
Port. The port number for the LDAP server. The default setting is 0 (zero).
If you clear the Enable DNS Proxy check box for the VLAN, all computers
Configure the IPv4 LAN Settings
124