Manage User Login Policies - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

Manage User Login Policies

You can restrict the ability of defined users to log in to the VPN firewall's web management
interface. You can also require or prohibit logging in from certain IP addresses or from
particular browsers.
The following sections provide information about managing user login policies:
• Configure Login Policies
• Configure Login Restrictions Based on IP Addresses
• Remove One or More IP Addresses for Login Restrictions
• Configure Login Restrictions Based on Web Browsers
• Remove One or More Web Browsers for Login Restrictions
Configure Login Policies
The following procedure describes how to configure a user login procedure.

To configure user login policies:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Users > Users.
The Users screen displays.
7. In the List of Users table, to the right of the user for which you want to set login policies, click
the corresponding Policies button.
The policies submenu tabs display, with the Login Policies screen in view.
Manage Users, Authentication, and VPN Certificates
508