NETGEAR FVS336Gv3 Reference Manual page 396

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > IPSec VPN > RADIUS Client.
The RADIUS Client screen displays.
7. Enter the settings as described in the following table.
Setting
Primary RADIUS Server
To enable and configure the primary RADIUS server, select the Yes radio button and enter the settings for
the three fields to the right. By default, No radio button is selected.
Primary Server IP Address
Secret Phrase
Primary Server NAS
Identifier
Set Up Virtual Private Networking With IPSec Connections
Description
The IPv4 address of the primary RADIUS server.
A shared secret phrase to authenticate the transactions between the client
and the primary RADIUS server. The same secret phrase must be configured
on both the client and the server.
The primary Network Access Server (NAS) identifier that must be present in a
RADIUS request.
The VPN firewall functions as an NAS, allowing network access to external
users after verification of their authentication information. In a RADIUS
transaction, the NAS must provide some NAS identifier information to the
RADIUS server. Depending on the configuration of the RADIUS server, the
VPN firewall's IP address might be sufficient as an identifier, or the server
might require a name, which you must enter in the Primary Server NAS
Identifier field.
396