NETGEAR FVS336Gv3 Reference Manual page 206

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > Routing.
The Static Routing screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The Static Routing screen displays the IPv6 settings. The following figure contains an
example.
8. Click the Add button under the Static Routes table.
The IPv6 Static Routing screen displays.
9. Enter the settings as described in the following table.
Setting
Route Name
Active
Description
The route name for the static route (for purposes of identification and
management).
To make the static route effective, select the Active check box.
Note: You can add a route to the table and make the route inactive if do not need
it. This allows you to use routes as needed without deleting and re-adding the
entries.
Configure the IPv6 LAN Settings
206