Hard Drive - HP EliteDesk 800 G1 Tower Service Manual

Hide thumbs Also See for EliteDesk 800 G1 Tower:
Table of Contents

Advertisement

Hard drive

Description
750 GB, 7200 rpm, hybrid SSD
500 GB, 7200 rpm, self-encrypting (SED)
500 GB, 7200 rpm
320 GB, 7200 rpm
500 GB, hybrid SSD
256 GB Solid State Drive (SSD), self-encrypting (SED)
128 GB Solid State Drive (SSD)
32 MB mSATA drive
NOTE:
The Ultra-Slim Desktop supports only 2.5-inch Serial ATA (SATA) internal hard drives.
Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you
can transfer the data to the new hard drive.
The 2.5-inch hard drive is enclosed in a carrier under the optical drive.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the optical drive
4.
Press in the release latch on the left side of the hard drive carrier (1) then rotate the carrier handle
up (2).
154
Chapter 7 Removal and replacement procedures: Ultra-slim Desktop (USDT)
(Preparation for disassembly on page
(Access panel on page
(Removing the optical drive on page
142).
151).
Spare part number
719105-001
696442-001
686217-001
639135-001
724938-001
680020-001
665961-001
719566-001
141).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents