System board and PCI expansion slot daughter card
NOTE:
All system board spare part kits include replacement thermal material.
Description
System board for use in models without Windows 8
System board for use in models with Windows 8 Standard
System board for use in models with Windows 8 Professional
System board for use in models with NetClone
HP PCI expansion slot daughter card
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
●
Expansion cards
●
Fan sink
●
Processor
●
4.
Disconnect all cables connected to the system board, noting their location for reinstallation.
5.
If a PCI expansion slot daughter card is installed, remove the two Torx T15 screws (1) that secure
the PCI extension board to the chassis.
92
Chapter 5 Removal and replacement procedures: Tower (TWR)
(Access panel on page
(Memory on page
(Expansion cards on page
(Fan sink on page
79).
(Processor on page
81)
(Preparation for disassembly on page
45).
50)
53)
Spare part number
696969-001
696969-501
696969-601
727720-001
696971-001
44).